Sacar volante de direccion

Chery Tiggo 2009 4puertas full 151000 kms
Como sacar volante de direccion de chery tiggo con airbag
Marcelo de Argentina hace 7 años  
MA
1 caso 
Xdriver de Argentina hace 7 años
Steering Wheel
Removal & Installation
Warning!
Before servicing the steering column, the airbag system must be disarmed. Failure to do so may result in accidental
Deployment of the airbag and possible personal injury (See Airbag System Disarming Procedure in Section
14 Restraints). Note :
To help maintain alignment of the spiral cable connector during reassembly, apply a small piece of tape to the spiral
Cable and the steering column to keep them in alignment. 1. Set the front wheels to the straight-ahead position. 2. Disconnect the negative battery cable. 3. Remove the driver airbag (See Driver Airbag Removal & Installation in Section 14 Restraints). 4. Disconnect the spiral cable electrical connector. 5. Remove the steering wheel lock nut (1). (Tighten: Steering wheel lock nut to 25 - 30 N·m)
6. Using the steering wheel puller, remove the steering
Wheel. 7. Installation is in the reverse order of removal. Installation Notes:
• The spiral cable could be damaged if installed in an improper position. • Do not rotate the spiral cable quickly or beyond the limit of turns (this can cause the cable to snap). • Verify the airbag system is operating properly after the repair is complete.
Alvaro Davila de Colombia hace 5 años
Es posible que esta respuesta se de en español...?
Enviar respuestaCancelar